Signs using the Centauri controller have been in use since December, 2014. There are two controllers used. One is the PCC80, which is used for smaller sized signs. The other is the PSD100. The PSD100 is used for larger scalable signs. The PSD100 controller can cascade down to a M3 receiver card. The PSD100 also uses the MON300 card, which can monitor all aspects of a sign's operation.

The software used is Quazar Centauri 4.4.0

The utility manager program is Centauri Manager 4.4.0

The system uses the Saturn Wireless System for communication. The system is designed to plug directly into the end user's internet router for full functionality.

For programming instructions see the Quazar-Centauri-Software-Guide.